About gas rebates
There are a variety of eligibility guidelines specific to each rebate. Please review all program requirements (PDF) before purchasing equipment or applying for rebates.
Note: If you are also applying for electric service rebates, you only need to complete and submit one copy of the rebate application. Be sure to include any necessary Measure Forms.
Download a fact sheet (PDF) to learn more about these rebates.
Select a rebate category below to view available incentives or view a complete list of all rebates (PDF). If you are applying for any rebates featured on this page, be sure to download and complete the Natural Gas Measure Form (PDF), and attach it to your completed application.
- Heating & cooling
Gas heating & cooling rebates
Specification Rebate Condensing hot water boiler (90% AFUE or higher, less than 300 MBH) $500/unit Condensing hot water boiler (90% TE or higher, 300-499 MBH) $1,500/unit Condensing hot water boiler (90% TE or higher, 500-999 MBH) $2,500/unit Condensing hot water boiler (90% TE or higher, 1000 MBH or higher) $5,000/unit Steam boiler $15/boiler hp Gas furnace (92% AFUE or higher, less than 90 MBTUH) $100/unit Gas furnace (92% AFUE or higher, 90 MBTUH or higher) $150/unit Gas furnace (95% AFUE or higher, 90 MBTUH or higher) $250/unit Gas furnace (97% AFUE or higher, 90 MBTUH or higher) $300/unit Infrared heater $350/unit High efficiency unit heater $200/unit Boiler & unit heater tune-up
Log sheet | Fact sheet
$200/unit Furnace tune-up
$20/unit Boiler reset control $250/unit
Gas thermostat rebates
Specification Rebate Wi-Fi enabled thermostat $100/unit Programmable thermostat $50/unit
- Commercial kitchen
Gas commercial kitchen rebates
Specification Rebate Low flow pre-rinse sprayer $50/unit Gas combination oven $900/unit Steam cooker $200/pan Infrared upright broiler $1,000/unit Infrared charbroiler $500/unit Commercial dishwasher (door type, high temp) $650/unit Commercial dishwasher (door type, low temp) $550/unit Commercial dishwasher (multi-tank conveyor, high temp) $1,600/unit Commercial dishwasher (multi-tank conveyor, low temp) $850/unit Commercial dishwasher (single-tank conveyor, high temp) $900/unit
- Steam traps
Gas steam trap rebates
Specification Rebate Steam trap service (dry cleaner) $250/trap Steam trap service (low pressure - less than 15 psi) $50/trap Steam pipe insulation $10/linear ft.
- Water heating
Gas water heating rebates
Specification Rebate Tankless water heater (.82 EF or higher) $300/unit Water heater (88% TE) $300/unit Hot water pipe insulation $3/linear ft.
How do I get started?
1. Download and complete the rebate application. For rebates under $20,000, you only need to complete the equipment rebate application once when submitting your rebate request.
Download, complete and attach the Measure Form(s) associated with the rebates you are applying for.
Retain invoices & log sheets
Keep a copy of all product and service invoices. You may also need to provide the necessary log sheet for services like tune-ups.
Need customized incentives?
Making energy upgrades which don't qualify for equipment rebates? See our Custom Programs for options regarding large or special energy efficiency projects.
How to apply for rebates
1. Determine eligibility
Existing facility: For equipment being installed/updated at an existing facility, the applicant must be a current Vectren natural gas business customer. For natural gas-saving project(s), applicant must be a natural gas customer on rate 120, 125, 220 or 225. Vectren customers who have elected to opt out of participating in Vectren's energy efficiency programs are not eligible.
New Construction: For equipment being installed at a new facility, the applicant must intend to receive natural gas from Vectren on an eligible rate for at least one year. See rebate application (PDF) and the terms and conditions (PDF) for complete eligibility guidelines.
Equipment must be purchased and installed by December 31, 2018. Read all requirements carefully to ensure your product qualifies.
Application and installation
The application must be postmarked within 90 days of equipment installation.
2. Complete application & attach all required documents
Unless noted otherwise, all fields must be completed on the application to receive a rebate.
Attach applicable Measure Form(s) and data sheets
Complete and attach the applicable Measure Form(s) for each rebate. Technical data sheets or manufacturer cut sheets are required for all installed equipment.
Ensure that you have attached copies of all invoices to the application. Invoices should include: the equipment make, model and cost, the date of installation, the total number of units installed and labor costs of equipment installation (for self-installations, internal labor hours and cost estimates must be provided).
3. Submit paperwork
Submit application, product forms & invoices
Submit your completed application, applicable Measure Form(s), technical data sheets and a copy of your itemized invoice(s) within 90 calendar days of equipment installation. You may do so in one of three ways:
- Email: Send application, product forms and invoices to firstname.lastname@example.org
- Mail: Vectren Energy Efficiency, ATTNL Business Rebate Programs | P.O. Box 513, Evansville, IN 47703
- Fax: (608) 829-2723
Allow up to six weeks to receive payment after the final approval of application.